⚡ 详细使用教程 / Complete Tutorial

快枪手 B20 Sniper Pro 使用手册
QuickShot B20 Sniper Pro User Guide

访问地址 / URL: https://B20SIPNER.XYZ

这是一份给普通用户看的完整教程：从第一次打开机器人，到创建钱包、设置狙击、设置风控、启动模拟和实盘、跟单与返佣。

A complete user tutorial: from first launch to wallet setup, sniper settings, risk controls, dry-run, live trading, copy trading, and referral rewards.

中文版

1. 这个机器人是什么

快枪手 B20 Sniper Pro 是一个 Telegram 交易控制台，面向 Base 链用户，用于管理 EVM 热钱包、配置 B20 / Clanker B20 狙击、设置买入参数、自动止盈止损、跟单和邀请返佣。

钱包管理

创建热钱包、导入私钥、查看余额、显示私钥一次、导出加密备份、转账余额。

智能狙击

选择 B20 第一个、Clanker 第一个，设置买入数量、gas 和 Clanker 磨损容忍值。

风控卖出

设置滑点、流动性过滤、价格冲击过滤、止盈、止损和移动止盈。

跟单返佣

添加跟单钱包，设置单笔金额，并通过邀请链接获得一级返佣。

风险提醒：新币狙击可能失败、买贵、买到恶意币、遇到高税费或无流动性。请只使用小额热钱包，不要导入主钱包，不要投入不能承受损失的资金。

2. 快速开始

在 Telegram 打开机器人，发送 /start。
点击 👜 钱包管理，创建或导入一个专门交易用的小额 EVM 热钱包。
向钱包地址充值少量 Base ETH，用于买入和 gas。
进入 🎯 智能狙击，选择目标、设置买入金额、gas 和 Clanker 容忍磨损。
先用 /dryrun_start 模拟监控，确认设置无误。
确认要实盘时，使用 /live_start I_UNDERSTAND。

/start
/menu
/sniper

3. 语言切换

点击控制台里的 🌐 语言，选择 中文 或 English。选择英文后，菜单、按钮和主要提示都会切换成英文。

4. 钱包管理

功能	用途	建议
创建 EVM 钱包	生成新的 Base 热钱包。	推荐新用户使用，只充值小额风险资金。
导入私钥	导入已有 EVM 钱包私钥或钱包文件。	只导入专门交易用的小额钱包，不要导入主钱包。
充值地址	复制当前 bot 钱包地址。	从自己的钱包转少量 Base ETH。
显示私钥一次	用户需要自行备份私钥时使用。	私钥只显示一次，默认短时间后自动删除。
导出加密备份	导出加密 keystore 文件。	比在聊天里保存明文私钥更安全。
余额转移	把钱包 ETH 转出到指定地址。	转账前预留少量 gas。

/wallet_create
/wallet

5. 私钥显示一次

进入 👜 钱包管理 → 🔐 显示私钥一次。机器人会要求逐字发送确认词：

我确认导出私钥

确认后私钥只发送一次，默认短时间后自动删除。请立即复制并离线保存。任何人拿到私钥都可以转走钱包资产。

6. 智能狙击面板

进入 🎯 智能狙击 或发送 /sniper。面板会显示当前启动状态、选择的目标、买入金额、gas、Clanker 容忍磨损和实时狙击状态。

设置	说明	常用值
抢第一个 B20	监听 Base 链 B20 创建事件，命中后按设置尝试买入。	按需开启
抢第一个 Clanker B20	检测 Clanker 相关 B20，并根据 auction 磨损容忍值等待后买入。	按需开启
B20 买入金额	每次 B20 狙击使用的 ETH 数量。	0.005 / 0.01 ETH
Clanker 买入金额	每次 Clanker 狙击使用的 ETH 数量。	0.005 / 0.01 ETH
加速费 gas	交易使用的 gwei。越高通常越快，但成本也越高。	5 / 8 / 15 gwei
Clanker 容忍磨损	估算 auction fee / 磨损低于该值才买入。	15% / 30% / 50%

/setbudget 0.005
/setbudget first_b20 0.005
/setbudget clanker 0.005
/gas 8
/clankerfee 30

7. Clanker 容忍磨损和等待时间

Clanker 新池可能开启 anti-sniper / launch auction。创建后约 2 个区块内普通 swap 可能被拦截，之后前 15 秒 LP fee / 磨损从高位逐步下降。机器人会按你设置的“容忍磨损”等待，低于该百分比才进入买入。

容忍磨损	预计等待时间	适合场景
15%	约 14 秒	更稳，成本更低，但可能错过更早成交。
30%	约 10 秒	速度和成本较平衡，默认推荐。
50%	约 7 秒	更激进，更快，但可能被高 fee 吃掉更多。

等待时间从创建块开始计算，已包含约 4 秒保护窗口。实际成交会受区块时间、RPC 延迟、交易路由和链上状态影响。

8. 滑点、流动性和价格冲击

风控设置用于减少明显不适合进入的交易，但不能消除所有风险。

参数	含义	示例
滑点	允许成交价格相对报价变化的最大百分比。	`/slippage 15`
最低流动性	低于该流动性时过滤。	`50000`
最大价格冲击	价格冲击高于该值时过滤。	`35%`

/slippage 15
/filters 50000 35
/filters 50000,35%
/filters $50000 35%

9. 止盈、止损和移动止盈

自动卖出规则用于买入后管理仓位。请根据自己的风险偏好设置，不要把它当成收益保证。

功能	说明	示例
止盈	达到指定倍数后卖出部分或全部。	2x 卖 50%，8x 清仓。
止损	跌到指定倍数后卖出指定比例。	跌到 0.5x 卖 100%。
移动止盈	价格创新高后，回撤到指定比例触发卖出。	回撤 8% 卖 50%。

/tp on 2 8 50
/tp off

更复杂的止损和移动止盈可以在 👋 自动卖出 菜单里按按钮设置。

10. 模拟监控和实盘启动

建议先用模拟监控确认目标、金额、gas 和风控参数。模拟不会花钱。

/dryrun_start
/status
/logs
/stop

实盘会使用 bot 钱包真钱交易，需要明确确认：

/live_start I_UNDERSTAND

11. 跟单

进入 👥 跟单，添加需要跟随的钱包地址，设置单笔买入金额，然后启动真实跟单。跟单速度受目标钱包交易传播、RPC、路由、gas 和链上流动性影响。

步骤	说明
添加跟单钱包	输入要跟随的钱包地址。
设置单笔金额	每次跟单买入使用的 ETH 数量。
启动跟单	开始监听和提交交易。
暂停跟单	停止当前跟单任务。

12. 邀请返佣

进入 💰 邀请返佣 查看专属邀请链接。返佣规则如下：

一级邀请 · 交易服务费 1% · 推广您的邀请链接给新用户，如果他们使用它注册并交易，那么您将终身获得您推荐用户交易服务费的 35%。

返佣统计会显示邀请人数、有效用户、累计手续费、累计返佣、可结算和已结算金额。

13. 常用命令

命令	作用
`/start`	启动机器人并打开控制台。
`/menu`	打开主控制台。
`/sniper`	打开智能狙击面板。
`/wallet_create`	创建新的 EVM 热钱包。
`/wallet`	查看钱包地址和余额。
`/setbudget 0.005`	同时设置 B20 和 Clanker 买入金额。
`/setbudget clanker 0.005`	单独设置 Clanker 买入金额。
`/clankerfee 30`	设置 Clanker 容忍磨损。
`/slippage 15`	设置滑点百分比。
`/gas 8`	设置 gas gwei。
`/filters 50000 35`	设置最低流动性和最大价格冲击。
`/tp on 2 8 50`	设置止盈规则。
`/dryrun_start`	启动模拟监控。
`/live_start I_UNDERSTAND`	确认启动实盘。
`/status`	查看运行状态。
`/logs`	查看最近日志。
`/stop`	停止当前任务。
`/cancel`	取消当前输入。

14. 常见问题

点击 Start 没反应怎么办？

先发送 /start，再发送 /menu。如果仍无反应，确认机器人是否被 Telegram 屏蔽、网络是否可用，或联系管理员检查服务状态。

为什么 Clanker 没有马上买？

Clanker 可能有 launch auction 保护窗口。机器人会等待估算磨损低于你的容忍值再买入，面板会显示等待状态。

导入私钥安全吗？

机器人会尝试删除你发送的私钥消息，并在服务器侧加密保存。更安全的做法是创建新的小额热钱包，只充值风险资金。

实盘一定能买到吗？

不能保证。成交受链上拥堵、RPC、gas、路由、池子状态、滑点、代币限制和流动性影响。

手续费和返佣怎么理解？

使用机器人交易会收取交易服务费。被邀请用户交易产生的服务费，会按返佣规则给邀请人累计返佣。

English Version

1. What this bot is

QuickShot B20 Sniper Pro is a Telegram trading dashboard for Base users. It helps manage an EVM hot wallet, configure B20 / Clanker B20 sniping, tune buy settings, automate TP/SL, copy wallets, and track referral rewards.

Wallet

Create a hot wallet, import a private key, check balance, show private key once, export encrypted backup, and transfer funds.

Sniper

Select First B20 or First Clanker B20, configure buy size, gas, and Clanker max-loss tolerance.

Risk & Sell

Set slippage, liquidity filter, price-impact filter, take profit, stop loss, and trailing TP.

Copy & Referral

Add wallets to copy, set per-trade size, and earn level-1 referral rewards.

Risk notice: new-token sniping can fail, overpay, buy malicious tokens, hit high taxes, or enter illiquid pools. Use only a small hot wallet and never deposit funds you cannot afford to lose.

2. Quick start

Open the bot in Telegram and send /start.
Open 👜 Wallet and create or import a small EVM hot wallet for trading.
Deposit a small amount of Base ETH for buys and gas.
Open 🎯 Sniper, choose targets, set buy amount, gas, and Clanker max loss.
Run /dryrun_start first to verify settings without spending funds.
When ready for live trading, use /live_start I_UNDERSTAND.

/start
/menu
/sniper

3. Language

Tap 🌐 Language in the dashboard and choose English or Chinese. Main menus, buttons, and prompts will switch language.

4. Wallet management

Feature	Purpose	Recommendation
Create EVM Wallet	Generate a new Base hot wallet.	Recommended for new users. Fund it with only a small risk amount.
Import Private Key	Import an existing EVM private key or wallet file.	Only import a dedicated trading wallet. Never import your main wallet.
Deposit Address	Copy the current bot wallet address.	Transfer a small amount of Base ETH from your own wallet.
Show Private Key Once	Use when you need to back up your key yourself.	The key is shown once and auto-deleted shortly after.
Export Encrypted Backup	Export an encrypted keystore file.	Safer than storing plaintext private keys in chat.
Transfer Balance	Send ETH from the bot wallet to another address.	Leave a little ETH for gas.

/wallet_create
/wallet

5. Show private key once

Open 👜 Wallet → 🔐 Show Private Key Once. The bot asks you to send this confirmation phrase exactly:

I CONFIRM EXPORT PRIVATE KEY

After confirmation, the key is sent once and auto-deleted shortly after. Copy it immediately and store it offline. Anyone with the private key can move the wallet funds.

6. Sniper panel

Open 🎯 Sniper or send /sniper. The panel shows run state, selected targets, buy amounts, gas, Clanker max loss, and live sniper status.

Setting	Description	Common value
First B20	Watch Base B20 creation events and attempt to buy when matched.	Enable as needed
First Clanker B20	Detect Clanker-related B20 launches and wait for max-loss tolerance before buying.	Enable as needed
B20 buy amount	ETH amount used for each B20 snipe.	0.005 / 0.01 ETH
Clanker buy amount	ETH amount used for each Clanker snipe.	0.005 / 0.01 ETH
Gas boost	Transaction gas in gwei. Higher is often faster but more expensive.	5 / 8 / 15 gwei
Clanker max loss	Only buy when estimated auction fee / loss is below this value.	15% / 30% / 50%

/setbudget 0.005
/setbudget first_b20 0.005
/setbudget clanker 0.005
/gas 8
/clankerfee 30

7. Clanker max loss and wait time

New Clanker pools may use an anti-sniper / launch auction. For roughly 2 blocks after creation, normal swaps can fail. Then the first 15 seconds can carry very high LP fee / loss that decays over time. The bot waits until estimated loss is below your configured max loss before buying.

Max loss	Estimated wait	Use case
15%	About 14 seconds	Safer and cheaper, but slower.
30%	About 10 seconds	Balanced speed and cost. Default recommendation.
50%	About 7 seconds	More aggressive and faster, but more expensive.

Wait time is counted from the creation block and includes the roughly 4-second protection window. Actual execution can vary with block time, RPC latency, route, and live on-chain state.

8. Slippage, liquidity, and price impact

Risk filters can reduce obviously bad entries, but they cannot eliminate all trading risk.

Parameter	Meaning	Example
Slippage	Maximum allowed price movement from quoted price.	`/slippage 15`
Minimum liquidity	Filter out launches below this liquidity.	`50000`
Maximum price impact	Filter out trades above this impact.	`35%`

/slippage 15
/filters 50000 35
/filters 50000,35%
/filters $50000 35%

9. Take profit, stop loss, and trailing TP

Auto-sell rules help manage positions after a buy. They are not profit guarantees.

Feature	Description	Example
Take profit	Sell part or all of a position at configured multiples.	Sell 50% at 2x, exit all at 8x.
Stop loss	Sell a configured percentage if value drops to a threshold.	Sell 100% at 0.5x.
Trailing TP	After a new high, sell if price pulls back by a configured percentage.	Sell 50% after 8% pullback.

/tp on 2 8 50
/tp off

More advanced stop-loss and trailing settings are available in the 👋 Auto Sell menu.

10. Dry-run and live trading

Use dry-run first to confirm targets, amounts, gas, and filters. Dry-run does not spend funds.

/dryrun_start
/status
/logs
/stop

Live trading uses real funds and requires explicit confirmation:

/live_start I_UNDERSTAND

11. Copy trading

Open 👥 Copy, add a wallet address to copy, set per-trade buy amount, then start live copy trading. Speed depends on target-wallet transaction propagation, RPC, route, gas, and pool liquidity.

Step	Description
Add copy wallet	Enter the wallet address you want to follow.
Set buy amount	ETH amount used for each copied trade.
Start copy trading	Start listening and submitting trades.
Pause copy trading	Stop the current copy-trading task.

12. Referral rewards

Open 💰 Referral to view your invite link. Referral rule:

Level-1 referral · 1% trading service fee · Share your invite link with new users. If they register and trade through it, you earn 35% of your referred users' trading service fees for life.

The referral page shows invitees, active users, total fees, total rebates, pending payout, and paid amount.

13. Common commands

Command	Purpose
`/start`	Start the bot and open dashboard.
`/menu`	Open main dashboard.
`/sniper`	Open sniper panel.
`/wallet_create`	Create a new EVM hot wallet.
`/wallet`	View wallet address and balance.
`/setbudget 0.005`	Set both B20 and Clanker buy amount.
`/setbudget clanker 0.005`	Set Clanker buy amount only.
`/clankerfee 30`	Set Clanker max loss.
`/slippage 15`	Set slippage percentage.
`/gas 8`	Set gas gwei.
`/filters 50000 35`	Set minimum liquidity and maximum price impact.
`/tp on 2 8 50`	Set take-profit rule.
`/dryrun_start`	Start dry-run monitoring.
`/live_start I_UNDERSTAND`	Confirm live trading.
`/status`	View running status.
`/logs`	View recent logs.
`/stop`	Stop current task.
`/cancel`	Cancel current input.

14. FAQ

Start button does not respond. What should I do?

Send /start, then /menu. If there is still no response, check whether the bot is blocked, your network is available, or ask the operator to check service status.

Why does Clanker not buy immediately?

Clanker may use a launch auction protection window. The bot waits until estimated loss is below your configured max loss, and the panel shows the waiting state.

Is private-key import safe?

The bot tries to delete your private-key message and stores the key encrypted on the server. The safer approach is to create a new small hot wallet and fund only risk capital.

Can live trading guarantee a buy?

No. Execution depends on network congestion, RPC, gas, route, pool state, slippage, token restrictions, and liquidity.

How do fees and referrals work?

Trades made through the bot are charged a trading service fee. If a referred user trades, part of that fee is counted as referral rewards according to the referral rule.

快枪手 B20 Sniper Pro 使用手册QuickShot B20 Sniper Pro User Guide

中文版

1. 这个机器人是什么

钱包管理

智能狙击

风控卖出

跟单返佣

2. 快速开始

3. 语言切换

4. 钱包管理

5. 私钥显示一次

6. 智能狙击面板

7. Clanker 容忍磨损和等待时间

8. 滑点、流动性和价格冲击

9. 止盈、止损和移动止盈

10. 模拟监控和实盘启动

11. 跟单

12. 邀请返佣

13. 常用命令

14. 常见问题

点击 Start 没反应怎么办？

为什么 Clanker 没有马上买？

导入私钥安全吗？

实盘一定能买到吗？

手续费和返佣怎么理解？

English Version

1. What this bot is

Wallet

Sniper

Risk & Sell

Copy & Referral

2. Quick start

3. Language

4. Wallet management

5. Show private key once

6. Sniper panel

7. Clanker max loss and wait time

8. Slippage, liquidity, and price impact

9. Take profit, stop loss, and trailing TP

10. Dry-run and live trading

11. Copy trading

12. Referral rewards

13. Common commands

14. FAQ

Start button does not respond. What should I do?

Why does Clanker not buy immediately?

Is private-key import safe?

Can live trading guarantee a buy?

How do fees and referrals work?

快枪手 B20 Sniper Pro 使用手册
QuickShot B20 Sniper Pro User Guide